Engines

CHEVROLET CLASSIC CRATE MOTORS

350 Chevy 350 HP

US$8,450.00

4 Bolt Main, Roller Cam, Full Round Seal, Vortec  Cylinder Heads

GM 350 Crankshaft
Performance Connecting Rods
9.6:1 Compression Pistons
Speed Pro Moly Rings
Melling 3 Piece Timing Set
Clevite Trimetal Engine Bearings
Melling High Pressure Oil Pump
Comp Cams Hydraulic Roller Camshaft, Duration @050 220/224, Lift 495/502
Vortec Cylinder Heads 64cc
New Intake Valves
New Exhaust Valves
Hard Seats And Guides For Unleaded Fuel
New Hardened Pushrods, Hi Rev Lifters
1.5 Ratio Rocker Arms
New Oil Pan, Timing Cover and Valve Covers
New Gm Harmonic Balancer Damper
New Flexplate For Auto Trans (Std Trans Flywheel $225.00 Extra)
Balanced, Blue Printed Assembled And Painted
New Edelbrock Vortec Intake Manifold
New Quick Fuel 600 CFM Carburetor
New MSD HEI Distributor With 53,000 Volt Coil
New Spark Plugs, Taylor Ignition Wires And Electric Choke Assy
New Thermostat Chrome Housing
New Fuel Pump
New Hard Tube Fuel Line with Filter
Braided lines to Filter and Pump – Add US$210.00
New Water Pump
New Dip Stick, Tube, Oil Filter and Housing
New Air Cleaner, Complete P.C.V. Ventilation System
Hot Run Tested
Ignition Timing And Carburetor Fully Adjusted
Packaged And Crated
No Core, Sold Outright

Shown with optional pulley system

TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

RECOMMENDATIONS
Small Tube Headers
370:1 Rear End Ratio
Mini Torque Starter US$225.00

 

 

350 Chevy 400 HP

US$8,950.00

350 Late Style Roller Cam Block With Full Round Seal.
GM 350 Crankshaft.
Performance Connecting Rods.
9:73 Hypereutectic Pistons.
Speed Pro Moly Rings.
Comp Camshaft: Duration @ 050,218/224, Lift 534/529.
Melling 3 Piece Timing Set.
Clevite Trimetal Engine Bearings.
Melling High Pressure Oil Pump.
New Edelbrock Aluminum Heads With 64cc Combustion Chambers.
Hard Seats And Guides For Unleaded Fuel.
Hardened Pushrods, Roller Lifters.
Comp Cams Roller Rocker Arms.
New Chrome Oil Pan, Chrome Timing Cover, Chrome Valve Covers.
New Harmonic Balancer.
New Flexplate For Auto Trans (Std Trans Flywheel Extra).
Balanced, Blue Printed Assembled And Painted.
New Edelbrock Air Gap Intake Manifold #7501.
New Quick Fuel 600 CFM Carburetor.
New MSD HEI Distributor with 53,000 Volt Coil.
New Champion Spark Plugs, Taylor Ignition Wires, Electric Choke Assy.
New Thermostat Chrome Housing.
New Fuel Pump.
New Hard Tube Fuel Line with Filter.
Braided lines to Filter and Pump – Add $210.00.
New Water Pump.
New Dip Stick, Tube, And Oil Filter.
New Air Cleaner, Complete P.C.V. Ventilation System.
Hot Run Tested And All Valves Adjusted.
Free Installation DVD.
Ignition Timing And Carburetor Fully Adjusted.
Engine Is Dialed in.
Packaged and Crated.

TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

RECOMMENDATIONS
Small Tube Headers
370:1 Rear End Ratio

 

 

 

350 Chevy 375 HP

US$8,750.00

350 Chevy Block, .
Gm 350 Crankshaft.
Performance Connecting Rods.
9.5:1 Compression Pistons.
Speed Pro Moly Rings.
Melling 3 Piece Timing Set.
Clevite Trimetal Engine Bearings.
Melling High Pressure Oil Pump.
Muscle Car Camshaft Just A Bit Lumpy.
For That Muscle Car Feel And Sound.
Edelbrock Aluminum Cylinder Heads.
New 2.02″ Intake Valves.
New 1.60″ Exhaust Valves.
Hard Seats And Guides For Unleaded Fuel.
New Hardened Pushrods, Hi Rev Lifters.
Comp Cams Roller Rocker Arms.
New Chrome Oil Pan, Chrome Timing Cover, Chrome Valve Covers.
New Gm Harmonic Balancer Damper.
New Flexplate For Auto Trans (Std Trans Flywheel Extra).
Balanced, Blue Printed Assembled And Painted.
New Edelbrock Air Gap Intake Manifold #7501.
New Quick Fuel 600 Cfm Carburetor.
New Msd Hei Distributor With 53,000 Volt Coil.
New Champion Plugs, Taylor Ignition Wires And Electric Choke Assy.
New Thermostat Chrome Housing.
New Fuel Pump.
New Hard Tube Fuel Line With Filter.
Braided Lines To Filter And Pump – Add US$210.00.
New Water Pump.
New Dip Stick, Tube And Oil Filter.
New Air Cleaner, Complete P.C.V. Ventilation System.
Hot Run Tested.
Free 40 Minute Installation DVD.
Ignition Timing And Carburetor Fully Adjusted.
Packaged And Crated.
No Core Sold Outright.

TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

RECOMMENDATIONS
Small Tube Headers
370:1 Rear End Ratio
Mini Torque Starter US$225.00

 

 

350 Chevy 430 HP

US$9,250.00

350 / 430 Horsepower - 425 LBS of Torque

4-Bolt Main Full Round Seal Block
GM 350 Crankshaft
ZZ4 Pm Connecting Rods
10:1 Compression Pistons
Speed Pro Moly Rings
New Custom Ground Hydraulic Roller Camshaft, Great Torque And Sound
Melling 3 Piece Timing Set
Clevite Trimetal Engine Bearings
Melling High Pressure Oil Pump # M55HP
Screw In Rocker Studs
New Edelbrock Aluminum Heads With 64cc Combustion Chambers
New 2.02″ Stainless Steel Intake Valves
New 1.60″ Stainless Exhaust Valves
Hard Seats and Guides for Unleaded Fuel
New Pushrods, Guide Plates, and Roller Rocker Arms
New Chrome Oil Pan, Chrome Timing Cover, Chrome Valve Covers
New GM Harmonic Balancer Damper
New Flexplate for Automatic Trans (Std. Trans Flywheel Extra)
Balanced, Blue Printed Assembled and Painted
New Edelbrock Air Gap Intake Manifold #7501
New Quick Fuel 600 CFM Carburetor
New MSD HEI Distributor With 53,000 Volt Coil
New Champion Spark Plugs & Taylor Ignition Wires, Electric Choke Assy.
New Thermostat Chrome Housing
New Fuel Pump
New Hard Tube Fuel Line with Filter
Braided lines to Filter and Pump – Add $210.00
New Water Pump
New Dip Stick, Tube and Oil Filter
New Air Cleaner, Complete P.C.V. Ventilation System
Hot Run Tested
Free 40 Minute Installation DVD
Ignition Timing and Carburetor Fully Adjusted, Engine Is Dialed In
Packaged and Crated

Shown With Optional March Serpentine System

TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

Chevy 430 HP with Holley Sniper

 

 

 

350 Chevy 445 HP

US$11,295.00

350 / 445 Horsepower - 440 LBS of Torque

4-Bolt Main Full Round Seal Block.
Gm 350 Crankshaft.
Zz4 Pm Connecting Rods.
Hypereutectic Pistons.
Speed Pro Moly Rings.
New Custom Ground Muscle Car Roller Camshaft, Great Torque And Sound.
Edelbrock Double Roller Timing Set.
Heavy Duty Trimetal Engine Bearings.
Melling High Pressure Oil Pump.
Screw In Rocker Studs.
New Edelbrock Aluminum Heads With 64cc Combustion Chambers.
New 2.02″ Stainless Steel Intake Valves.
New 1.60″ Stainless Exhaust Valves.
Hard Seats And Guides For Unleaded Fuel.
New Pushrods, Guide Plates, And Roller Rocker Arms.
New Chrome Oil Pan, Chrome Timing Cover, Chrome Valve Covers.
New Gm Harmonic Balancer Damper.
New Flexplate For Automatic Transmission.
(Standard Transmission Flywheel Extra $200.00).
Balanced, Blue Printed Assembled And Painted.
New Edelbrock Air Gap Dual Quad Endurashine Intake Manifold # 75254.
Two New 4 Barrel 500 Cfm Edelbrock Carburetors.
New Blue Printed Excel Distributor With 53,000 Volt Coil.
New Champion Spark Plugs & Heavy Duty Ignition Wires, Electric Choke Assy.
New Thermostat Chrome Housing.
New Fuel And Water Pump.
New Dip Stick, Tube And Oil Filter.
New Air Cleaners, Complete P.C.V. Ventilation System.
Hot Run Tested.
Free 40 Minute Installation DVD.
Ignition Timing And Carburetor Fully Adjusted, Engine Is Dialed In.
Packaged And Crated

Shown With Optional March Serpentine System

TURN KEY ENGINE. - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

OPTIONAL
Mini Torque Starter US$225.00

RECOMMENDATIONS
Small Tube Headers
370:1 Rear End Ratio

 

 

383 Chevy Stroker 450 HP US$10,395.00

383 CHEVY 450 HORSEPOWER STREET STROKER ENGINE

LATE MODEL 4-BOLT MAIN BLOCK
NEW EAGLE STROKER CRANKSHAFT
NEW I-BEAM CONNECTING RODS
HYPEREUTECTIC PISTONS 10:1 COMPRESSION
SPEED PRO MOLY RINGS
CUSTOM GROUND HYDRAULIC ROLLER CAMSHAFT, DURATION @ 050 234/238, LIFT 539/548
EDELBROCK DOUBLE ROLLER TIMING SET
HEAVY DUTY TRIMETAL ENGINE BEARINGS
MELLING HIGH PRESSURE OIL PUMP # M55HP
FEL-PRO GASKETS
NEW EDELBROCK ALUMINUM CYLINDER HEADS WITH 64CC CHAMBERS
# 60895 CYLINDER HEADS NEW 2.02″ STAINLESS INTAKE VALVES
NEW 1.60″ STAINLESS EXHAUST VALVES
HARD SEATS AND GUIDES FOR UNLEADED FUEL
SCREW IN ROCKER STUDS
1.46 VALVE SPRINGS HANDLE VALVE LIFTS TO .575
NEW PUSHRODS, GUIDE PLATES
HEAVY DUTY ROLLER ROCKER ARMS
NEW OIL PAN, TIMING COVER, AND VALVE COVERS
NEW GM HARMONIC BALANCER DAMPER
NEW FLEXPLATE FOR AUTOMATIC TRANSMISSION (STD TRANS FLYWHEEL $200.00)
BALANCED, BLUEPRINTED, ASSEMBLED AND PAINTED
NEW LOW PROFILE INTAKE MANIFOLD
NEW QUICK FUEL 750 CFM CARBURETOR
NEW MSD HEI DISTRIBUTOR WITH 53,000 VOLT COIL
NEW CHAMPION SPARK PLUGS & TAYLOR IGNITION WIRES, ELECTRIC CHOKE ASSY
NEW THERMOSTAT CHROME HOUSING
NEW FUEL AND WATER PUMP
NEW HARD TUBE FUEL LINE WITH FILTER
BRAIDED LINES TO FILTER AND PUMP – ADD $210.00
NEW DIP STICK AND OIL FILTER
NEW AIR CLEANER, COMPLETE P.C.V VENTILATION SYSTEM

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

RECOMMENDATIONS
Mini Torque Starter US$225.00

 

 

383 Chevy Stroker 475 HP US$11,495.00

383 Chevy Stroker 475 Horsepower Will Replace Any Small Block Chevy Without Modifications.

New 4 Bolt Main 1 Piece Rear Seal Block
New Eagle Crankshaft
New I-Beam Connecting Rods, With 190,000 Psi Bolts
Hypereutectic Pistons 10 To 1 Compression, Runs On Pump Gas
Speed Pro Moly Rings
Comp Cams Hydraulic Roller Camshaft, Duration @ 050- 242/248, Intake Lift .584 — Exhaust Lift .579
Double Roller Timing Set
Heavy Duty Trimetal Engine Bearings
Melling High Pressure Oil Pump # M55hp
Fel-Pro Gaskets
New Edelbrock E Tec 200Vortec Cylinder Heads With 64cc Chambers
New 2.02″ Stainless Intake Valves
New 1.60″ Stainless Exhaust Valves
Hard Seats And Guides For Unleaded Fuel
Screw In Rocker Studs
1.46 Heavy Duty Valve Springs
New Hardened Pushrods, Guide Plates, And Roller Lifters
Comp Cams 1.6 Roller Rocker Arms
New Chrome Oil Pan And Chrome Timing Cover
New Proform Chevrolet Valve Covers
New Performance Harmonic Balancer Damper
New Flexplate For Auto Trans (Std Trans Flywheel Extra $250.00)
Balanced, Blueprinted, Assembled And Painted
Vortec Intake Manifold
New Quick Fuel 750 Cfm Carburetor
New Msd Hei Distributor With 53,000 Volt Coil
New Champion Spark Plugs & Taylor Ignition Wires, Electric Choke
Heavy Duty Wire Looms
New Thermostat Chrome Housing
New Fuel Pump
New Hard Tube Fuel Line With Filter
Braided Lines To Filter And Pump – Add $210.00
New Dip Stick And Tube, Oil Filter Housing And Oil Filter
New Air Cleaner, Complete P.C.V. Ventilation System
Free 40 Minute Installation Dvd
Digital Pictures Of Your Engine Being Built

Shown with Optional Serpentine System

TURN KEY ENGINE- ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

383 Chevy E tec 200 Edelbrock heads Sounds great

 

 

383 Chevy Stroker 500 HP US$12,395.00

383 Chevy Stroker 500 Horsepower Will Replace Any Small Block Chevy Without Modifications.

New Stroker 4 Bolt Main Block.
Stroker Crankshaft.
I-Beam Connecting Rods.
Power Forged Pistons 10.4:1 Compression.
Speed Pro Moly Rings.
Comp Cams Roller Camshaft Duration @ 050, 242/248, Lift, 584/579.
Heavy Duty Double Roller Timing Set.
Heavy Duty Trimetal Engine Bearings.
Melling High Pressure Oil Pump And Screen.
New Air Flow Research 65cc Cylinder Heads.
Screw In 7/16 Rocker Studs And Guide Plates.
New 2.05 Stainless Steel Intake Valves.
New 1.6 Stainless Exhaust Valves.
Comp Cams 1.6 Roller Rocker Arms.
Hard Seats And Guides For Unleaded Fuel.
New Hardened Pushrods, Roller Lifters.
New Oil Pan, Timing Cover, Chrome Valve Covers.
New Gm Harmonic Balancer Damper.
New Flexplate For Auto Trans (Std Trans Flywheel Extra).
Balanced, Blue Printed Assembled And Painted.
Entire Rotating Assembly Balanced.
New Edlebrock Air Gap Intake Manifold # 7501.
New Quick Fuel 750 Cfm Carburetor.
New Msd Hei Distributor With 53,000 Volt Coil.
New Champion Spark Plugs, Taylor Ignition Wires & Linear Looms.
New Thermostat Chrome Housing.
New Fuel Pump And Water Pump.
New Hard Tube Fuel Line With Filter.
New Dip Stick And Tube, Oil Filter Housing And Filter.
New Air Cleaner, Complete P.C.V. Ventilation System With Grommets.
Braided Lines To Filter And Pump – Add $210.00.
Mini High Torque Starter.
Hot Run Tested.
Free 40 Minute Installation DVD.
Ignition Timing And Carburetor Fully Adjusted, Engine Is Dialed In.
Packaged And Crated

Shown with Optional Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!

RECOMMENDATIONS TO RUN BEST
Headers
3.70 Or Higher Rear
End Gears
92 Octane
4 Core Radiator
2800 Stall Speed Converter

 

 

427 Chevy 525 HP US$14,495.00

All New Dart Shp Block W/Splayed 4 Bolt Main Caps.
Eagle 4340 4.000 Stroke Forged Steel Crank.
Eagle 4340 6.000 H-Beam Steel Connecting Rods.
Forged Pistons 10.25:1 Compression.
Moly Rings.
Double Roller Timing Set.
Dart Aluminum Cylinder Heads 2.050/1.600 Stainless Steel Valves.
1.470 Hydraulic Roller Springs W/ Steel Retainers.
Comp Cams Custom Hydraulic Roller Camshaft.
Hardened Seats For Running Unleaded Fuel.
Hydraulic Roller Lifters.
High Performance Pushrods (1-Piece).
Comp Cams Roller Rockers.
Melling High Pressure Oil Pump.
Clevite 77 H Series Rod & Main Bearings.
Fel-Pro Hp Head Gasket.3
High Performance Harmonic Balancer.
Automatic Flex Plate.
(Standard Flywheel Extra $250.00).
Moroso Oil Pan.
Chrome Timing Cover.
Polished Aluminum Valve Covers.
Dart Air Gap Intake Manifold.
Quick Fuel 750 Cfm Mechanical Secondary Carburetor.
New High Flow Water Pump.
New Fuel Pump.
Msd Race Prepped High Energy Ignition Distributor W/ 53,000 Volt Coil Pak.
New Spark Plugs Gapped And Installed.
Taylor 8mm High Temp Resistant Silicone Wires.
New Chrome Thermostat Housing.
14 Inch Chrome Air Cleaner.
PCV And Breather Installed.
New Hard Tube Fuel Line With Filter.
Braided Lines To Filter And Pump – Add $210.00.
Oil Filter, Dipstick And Diptube.
Mini High Torque Starter.
Ignition Timing Set, Carburetor Fully Adjusted.
Hot Run Tested And Dialed In Place.
Free 40 Minute Installation DVD.
Internally Balanced.
Blueprinted And Painted With A High Temperature Enamel Paint

Shown with Optional Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

 427 Chevy 525 HP with Holley Sniper

 

 

434 Chevy 600 HP - POA

434 Chevy 600HP/575 Torque
Will bolt in directly where any Chevy 350 engine does, this arrives ready to run right out of the Box as shown. This has the Heavy duty Dart Block with all forged Internals, Custom Billet Cam and AFR custom cylinder heads and CVF complete pulley system as shown.

 All New Dart SHP Block w/Splayed 4 Bolt Main Caps
• Eagle 4340 4.000 Stroke Forged Steel Crank
• Callie 4340 6.000 H-Beam Connecting rods
• Forged Pistons 10.25:1 Compression
• Moly Rings
• Double Roller Timing Set
• AFR Cylinder Heads 220 Runners 65cc
• Stainless Steel Valves, Angled Spark Plugs
• 1.500 Hydraulic Roller Springs w/ Steel Retainers
• Billet Custom Hydraulic Roller Camshaft
• Hardened Seats for running Unleaded fuel
• Hydraulic Roller Lifters
• High Performance pushrods (1-piece)
• Scorpion 1.6 Roller Rockers
• Melling High Pressure Oil Pump
• Clevite 77 H Series Rod & Main Bearings
• Fel-Pro HP Head Gasket with Pro
• High Performance Harmonic Balancer
• Standard Flywheel for TKO 600 Trans
• Custom Moroso Oil Pan
• Custom Timing Cover
• Aluminum Valve Covers
• Edelbrock Intake Manifold
• Quick Fuel 750 CFM Mechanical Secondary Carburetor
• New High Flow Water pump
• New Fuel Pump
• Race Prepped High Energy Ignition
• Distributor w/ 53,000 volt coil Pak
• New Spark plugs gapped and installed
• Taylor 8mm High Temp Resistant Silicone Wires
• New Chrome Thermostat Housing
• 14 Inch Drop Base Air Cleaner
• PCV and Breather Installed
• New Hard Tube Fuel Line with Filter
• Braided lines to Filter and Pump – Add $210.00
• Oil Filter, Dipstick and Diptube
• Mini High Torque Starter
• Ignition Timing Set, Carburetor fully adjusted
• Hot Run tested and dialed In place
• Internally Balanced , Blueprinted and Painted with a High Temperature Enamel Paint

 

454 Chevy 450 HP US$14,295.00

454 / 450 Horsepower @ 5,250 RPM
515 LBS of Torque @ 3,250 RPM

All New 4 Bolt Main Engine
9.6 To 1 Compression
Forged Steel Crankshaft
New Steel Beam Connecting Rods
Power Forged Pistons
Speed Pro Chrome Moly Rings
Heavy Duty Double Roller True Roller Timing Set
Aluminum Fast Burn Edelbrock Oval Port Heads W/ 110cc Combustion Chambers
2.19/1.88 Stainless Steel Valves, Hardened Valve Locks, Chrome Moly Retainers, Heavy Duty Valve Springs And Screw In Studs
Custom Hyd. Roller Camshaft Duration @ 050 211/230, Lift 510/540
Hardened Seats For Running Unleaded Fuel
Hydraulic Roller Lifters
Federal Mogul Tri-Metal Bearings
Black Oxide Coated Pushrods
New 1.7 Ratio Rocker Arms
Melling High Volume Oil Pump
Complete Fel-Pro Gasket Set
New Gm Harmonic Balancer
New Flexplate For Automatic Trans. (Standard Flywheel Extra US$250.00 )
New Oil Pan, Timing Cover And Baffled Valve Covers
Edelbrock Dual Plane Port Matched Intake Manifold # 7164
Quick Fuel 750 Cfm Carburetor
New High Flow Water Pump
New Fuel Pump
Race Prepped High Energy Ignition Distributor W/ 53,000 Volt Coil Pak
New Champion Spark Plugs Gapped And Installed
8mm High Temp Resistant Silicone Wires
New Chrome Thermostat Housing
14 Inch Chrome Air Cleaner
Pcv And Breather Installed
New Fuel Lines And Gas Filter
Oil Filter, Dipstick And Diptube
Ignition Timing Set, Carburetor Fully Adjusted
Hot Run Tested And Dialed In Place
Free 40 Minute Installation Dvd
Painted With A High Temperature Enamel Paint
Packaged And Crated For Shipment

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

OPTIONS
High Torque Starter US$225.00

 

 

502 Chevy 510 HP US$14,495.00

502 Chevy Big Block - 510 Horsepower
Hang on to your seat!
570 Lbs of Torque

4 Bolt Main Engine Block
Forged Steel Crankshaft
New Steel Beam Connecting Rods
Power Forged Pistons
Speed Pro Chrome Moly Rings
Heavy Duty Double Roller True Roller Timing Set
Aluminum Fast Burn Edelbrock Oval Port Heads W/110cc Combustion Chambers
2.19/1.88 Stainless Steel Valves, Hardened Valve Locks, Chrome Moly Retainers, Heavy Duty Valve Springs And Screw In Studs
Custom Hyd. Roller Camshaft
Hardened Seats For Running Unleaded Fuel
Hydraulic Roller Lifters
Federal Mogul Tri-Metal Bearings
Black Oxide Coated Pushrods
New 1.7 Ratio Rocker Arms
Melling High Volume Oil Pump
Complete Fel-Pro Gasket Set
New Gm Harmonic Balancer
New Flexplate For Automatic Trans.
(Standard Flywheel Extra)
New Oil Pan, Timing Cover And Baffled Valve Covers
Edelbrock Performer Rpm Dual Plane Intake Manifold
Quick Fuel 750 Cfm Carburetor
New High Flow Water Pump
New Fuel Pump
Race Prepped High Energy Ignition Distributor W/ 53,000 Volt Coil Pak
New Champion Spark Plugs Gapped And Installed
8mm High Temp Resistant Silicone Wires
New Chrome Thermostat Housing
14 Inch Chrome Air Cleaner
Pcv And Breather Installed
New Fuel Lines And Gas Filter
Oil Filter, Dipstick And Diptube
Ignition Timing Set, Carburetor Fully Adjusted
Hot Run Tested And Dialed In Place
Free 40 Minute Installation Dvd
Balanced , Blueprinted And Painted With A High Temperature Enamel Paint
Packaged And Crated For Shipment

Shown With Optional March Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

OPTIONS
High Torque StarterUS $225.00

 

555 Chevy 650 HP US$16,995.00

555 Chevy Big Block - 650 Horsepower
Hang on to your seat!
Astounding 620 Lbs of Torque!
Replaces any big block without modifications.

 
All New Dart 4 Bolt Main Engine Block 4.500 Bore X 4.25 Stroke
New Eagle 4340 Steel Crankshaft
New Forged Steel Connecting Rods
Mahle Forged Pistons 10.4 To 1 Compression
New Moly Rings
Comp Cams Double Roller Timing Set
New Dart Pro 1 Aluminum Cylinder Heads
2.25/1.88 Severe Duty Stainless Steel Valves
Hardened Seats And Guides For Unleaded Fuel
Hydraulic Comp Cams Hydrualic Roller Camshaft, Duration @ 050 240/248, Lift 588/594
Comp Cams Hydraulic Roller Lifters
Clevite H Series Bearings
Comp Cams 1 Piece Hardened Pushrods
Comp Cams Roller Rockers 1.7 Ratio
Melling Oil Pump
Fel-Pro Gaskets
Pro Race Harmonic Balancer SFI
New Flexplate For Automatic Transmission (Standard Flywheel Extra $250.00)
Canton Oil Pan
Timing Cover And Baffled Chrome Valve Covers
New Dart Intake Manifold
Quick Fuel 850 CFM Carburetor
New High Flow Water Pump
New Fuel Pump
MSD Race Prepped High Energy Ignition Distributor
New Spark Plugs Gapped And Installed
Taylor 8mm High Temp Resistant Silicone Wires
New Chrome Thermostat Housing
14 Inch High Flow Air Cleaner
PCV, Grommets & Breather Installed
New Braided Fuel Lines And Gas Filter
Oil Filter, Dipstick And Diptube
Ignition Timing Set, Carburetor Fully Adjusted
Mini High Torque Starter
Hot Run Tested And Dialed In Place
Free 40 Minute Installation DVD
Internally Balanced, Blueprinted And Painted With A High Temperature Enamel Paint
Packaged And Crated For Shipment

Shown With Optional March Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

RECOMMENDATIONS FOR OPTIMUM PERFORMANCE
Headers
370 Gears
4 Core Radiator

 

 

582 Chevy 700 HP - US$17,995.00

582 Chevy Big Block - 700 Horsepower
Hang on to your seat!
660 Lbs of Torque!

All New 9.8 Block W/Splayed 4 Bolt Main Caps
Eagle 4340 4.375 Stroke Steel Crank
Eagle 4340 6.535 H-Beam Steel Connecting Rods
J&E Forged Pistons 10.5:1 Compression (Compression Height 1.060)
Plasma – Moly Rings
Cloyes Billet True Roller Timing Set w/Torrington Bearing
Dart Pro 1 345 Aluminum Cylinder Heads 119cc (400 CFM)
1.550 Roller Springs W/ Steel Retainers And Screw In Studs
Comp Cams Custom Hydraulic Roller Camshaft Duration @ 050 248/254, Lift 647/647
Hardened Seats For Running Unleaded Fuel
Hydraulic Roller Lifters
High Performance Pushrods (1-Piece)
Comp Cams Pro Magnum Rocker Rockers 1.7 Ratio
Moroso Race Prepped Oil Pump W/Tig Welded Hd Pickup
Complete Fel-Pro Gasket Set
Cometic Multi Layered Steel Head Gasket
High Performance Harmonic Balancer (Standard Flywheel Extra)
Moroso Stroker Street/Strip Oil Pan With Windage Tray
Timing Cover With Billet Timing Pointer
Polished Aluminum Valve Covers
Edelbrock Victor Series Intake Manifold
Quick Fuel 950 CFM Mechanical Secondary Carburetor
New High Flow Water Pump
New Fuel Pump
MSD Race Prepped High Energy Ignition Distributor W/ 53,000 Volt Coil Pak
New Spark Plugs Gapped And Installed
8mm High Temp Resistant Silicone Wires
New Chrome Thermostat Housing
14 Inch Chrome Air Cleaner
PCV And Breather Installed
New Braided Fuel Lines And Gas Filter
Oil Filter, Dipstick And Diptube
Mini High Torque Starter
Ignition Timing Set, Carburetor Fully Adjusted
Hot Run Tested And Dialed In Place
Free 40 Minute Installation DVD
Internally Balanced , Blueprinted And Painted With A High Temperature Enamel Paint

Shown With Optional March Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

OPTIONS
High Torque Starter US$225.00

 

598 Chevy 750 HP - US$18,495.00

598 Chevy Big Block - 750 Horsepower
Hang on to your seat!
680 Lbs of Torque!

All New Dart Big “M” Low Deck Block W/Splayed 4 Bolt Main Caps
Eagle 4340 4.500 Stroke Steel Crank
Eagle 4340 6.535 H-Beam Steel Connecting Rods
JE Custom 10.75:1 Forged Aluminum Pistons
Plasma – Moly Rings
Cloyes Billet True Roller Timing Set W/Torrington Bearing
Dart Pro 1 345 Aluminum Cylinder Heads w/CNC Ported Combustion Chambers
1.550 Roller Springs W/ Steel Retainers And Screw In Studs
Comp Cams Custom Hydraulic Roller Camshaft Duration @ 050 248/254, Lift 647/647
Hardened Seats For Running Unleaded Fuel
Hi Rev Hydraulic Roller Lifters
Chrome Moly (1-Piece) .080” Wall Pushrods
Comp Cams 1.7 Ultra Pro Magnum Rocker Rockers
Moroso Race Prepped Oil Pump W/Tig Welded Hd Pickup
Complete Fel-Pro Gasket Set
Cometic Multi Layered Steel Head Gasket
SFI Harmonic Balancer
(Required At All Race Tracks)
Automatic Flexplate (Standard Flywheel Extra)
Moroso Stroker Street/Strip Oil Pan With Windage Tray
Timing Cover With Billet Timing Pointer
Polished Aluminum Valve Covers
Merlin “X” Dominator Aluminum Intake Manifold
Quickfuel 950CFM Mechanical Secondary Carburetor
New High Flow Water Pump
New Fuel Pump
MSD Pro Billet Distributor W/ MSD 6al Electronic Ignition Box And Coil
New Spark Plugs Gapped And Installed
MSD 8.5 Mm Wire Set
New Chrome Thermostat Housing
14 Inch Chrome Air Cleaner
PCV And Breather Installed
New Braided Fuel Lines And Gas Filter
Oil Filter, Dipstick And Diptube
Mini High Torque Starter
Ignition Timing Set, Carburetor Fully Adjusted
Hot Run Tested And Dialed In Place
Free 40 Minute Installation DVD
Complete Assembly Internally Balanced , Painted With A High Temperature Enamel Paint

Shown With Optional March Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

 

 

632 Chevy 800 HP - US$19,995.00

632 Chevy Big Block - 800 Horsepower
Hang on to your seat!
770 Lbs of Torque!

All New Dart Big “M” Tall Deck Block W/Splayed 4 Bolt Main Caps
Callies 4340 Magnumplus 4.750” Stroke Steel Crank
Eagle 4340 6.700 H-Beam Steel Connecting Rods W/Arp 2000 Bolts
Ross/SSRE Custom 10.75:1 Forged Aluminum Pistons
Speed Pro Plasma Moly Rings
Cloyes Billet True Roller Timing Set W/Torrington Bearing
Dart Pro 2 380 Fully Cnc Ported Aluminum Cylinder Heads
1.640 Manley Nextek Roller Springs, 10’ Titanium Retainers
Comp Cams Custom Hydraulic Roller Camshaft Duration @ 050 248/254, Lift 647/647
Hardened Seats For Running Unleaded Fuel
Hi Rev Hydraulic Roller Lifters
Chrome Mmoly (1-Piece) .080” Wall Pushrods
· Harland Sharp Wide Body 1.7 Rocker Rockers
Moroso Race Prepped Oil Pump W/Tig Welded HD Pickup
Complete Fel-Pro Gasket Set
Cometic Multi Layered Steel Head Gasket
SFI Harmonic Balancer
(Required At All Race Tracks)
Automatic Flexplate (Standard Flywheel Extra)
SSRE/ Moroso Pro Windage Series Oil Pan
Timing Cover With Billet Timing Pointer
Polished Aluminum Valve Covers
Merlin “X” Dominator Aluminum Intake Manifold
Quick Fuel 1050 CFM Carburetor
New High Flow Water Pump
New Holley Billet Gerotor Electric Fuel Pump
MSD Pro Billet Distributor W/ MSD 6al Electronic Ignition Box And Coil
New Spark Plugs Gapped And Installed
MSD 8.5 Mm Wire Set
New Chrome Thermostat Housing
14 Inch Chrome Air Cleaner
Pcv And Breather Installed
New Braided Fuel Lines And Gas Filter
Oil Filter, Dipstick And Diptube
Mini High Torque Starter
Ignition Timing Set, Carburetor Fully Adjusted
Hot Run Tested And Dialed In Place
Free 40 Minute Installation DVD
Complete Assembly Internally Balanced , Painted With A High Temperature Enamel Paint

Shown With Optional March Serpentine System

TURN KEY ENGINE - ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!