Subframe Connectors

Subframe Connectors

Subframe connectors are a key component regarding traction. The stiffer the chassis is, the more effectively the rear suspension can do its job and ultimately transfer the power to the ground. When you compare your engine’s HP output to the hp at your rear wheels, you’re really measuring how efficiently your car transfers energy. The more rigid suspension, body and driveline components are, the less power you lose before reaching the ground.

That’s one of the big reasons why tube-chassied cars launch so hard and straight. The tubing provides an incredibly rigid frame, so there is no chance to upset the suspension and waste valuable power. With subframe connectors installed, the suspension can do its job without having to overcome the force of a twisting chassis.

1964-1973 MUSTANG SUB FRAME CONNECTORS

Part # AL-102416

1964-1973 Mustang sub frame connectors

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1967-1969 CAMARO/FIREBIRD SUB FRAME CONNECTORS

Part # AL-102413

1967-1969 Camaro and Firebird sub frame connectors.

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1967-1969 CAMARO/FIREBIRD SUBFRAME CONNECTORS

Part # CF-110-WT

1967-1969 Camaro/Firebird Subframe Connectors- Convertible (Pro-G® Subframe)

1967-1969 CAMARO/FIREBIRD SUBFRAME CONNECTORS COUPE

Part # CF-107-WT

1967-1969 CAMARO/FIREBIRD COUPE SUBFRAME CONNECTORS  ( Pro-G® )

1968-1972 NOVA 4-LINK SUBFRAME CONNECTORS

Part # RN-055

1968-1972 Nova Subframe Connectors rear 4-Link- Factory Subframe

1968-1974 NOVA FRONT SUBFRAME CONNECTOR - PRO-G®

Part # RN-056-WT

1968-1974 Nova Subframe Connectors for Wide Tire Series (PRO G Suspension)

1968-1979 NOVA SUB FRAME CONNECTORS

Part # AL-102417

1968-1979 Nova sub frame connectors.

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1970-1973 CAMARO/FIREBIRD SUBFRAME CONNECTORS

Part # RC-122

1970-1973 Camaro/Firebird Subframe Connectors (Factory Frame) 

1970-1977 MAVERICK SUB FRAME CONNECTORS

Part # AL-102419

1970-1977 Maverick sub frame connectors (round tube)

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty. (they can also be welded)

*Image is a stock photo and may differ from actual product.

1970-1981 CAMARO AND FIREBIRD DRIVE SHAFT HOOP REAR

Part # RC-125

1970-1981 Camaro/Firebird Drive Shaft Hoop - (Subframe Connectors Required)

1970-1981 CAMARO AND FIREBIRD SUBFRAME CONNECTORS

Part # CF-202

1970-1981 Camaro/Firebird Subframe Connectors-Coupe (PRO-G® )

1970-1981 CAMARO/FIREBIRD SUB FRAME CONNECTORS

Part # AL-102412

1970-1981 Camaro and Firebird sub frame connectors.

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1979-1993 MUSTANG SUB FRAME CONNECTORS

Part # AL-102415

1979-1993 Mustang sub frame connectors

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1982-1992 CAMARO 2 POINT STRUT TOWER BRACE

Part # CF-425

1982-1992 Camaro/Firebird 2 point non adjustable strut tower brace for throttle body motors. Help improve the handling of your 3rd Gen F Body on the street, strip or track with our bolt on strut tower braces. Our strut tower braces are also available in 3 point and fully adjustable variations for the hardcore racer.

1982-1992 CAMARO 2 POINT STRUT TOWER BRACE

Part # CF-370

1982-1992 Camaro and Firebird adjustable two point strut tower brace. Update the handling of your 3rd Gen Camaro or Firebird with simple bolt on parts from Heidts®. Fits V6 Throttle Body and V8 Tune Port motors.

Strut tower braces are also available in three point configuration and for all stock engine options.

1982-1992 CAMARO 2 POINT STRUT TOWER BRACE FOR 305 MOTOR

Part # CF-372

1982-1992 Camaro and Firebird adjustable two point strut tower brace. Update the handling of your 3rd Gen Camaro or Firebird with simple bolt on parts from Heidts®. Fits 305 Throttle Body Injection motors

Strut tower braces are also available in three point configuration and for all stock engine options.

1982-1992 CAMARO 2 POINT STRUT TOWER BRACE TPI

Part # CF-427

1982-1992 Camaro/Firebird 2 point non adjustable strut tower brace for TPI motors. Help improve the handling of your 3rd Gen F Body on the street, strip or track with our bolt on strut tower braces. Our strut tower braces are also available in 3 point and fully adjustable variations for the hardcore racer.

1982-1992 CAMARO 3 POINT STRUT TOWER BRACE

Part # CF-371

1982-1992 Camaro and Firebird adjustable three point strut tower brace. Update the handling of your 3rd Gen Camaro or Firebird with simple bolt on parts from Heidts®. Fits V6 Throttle Body and V8 Tune Port motors.

Strut tower braces are also available in two point configuration and for all stock engine options.

1982-1992 CAMARO 3 POINT STRUT TOWER BRACE

Part # CF-426

1982-1992 Camaro and Firebird non adjustable 3 point strut tower brace for throttle body motors. Help improve the handling of your 3rd Gen F Body on the street, strip or track with our bolt on strut tower braces. Our strut tower braces are also available in 2 point and fully adjustable variations for the hardcore racer.

1982-1992 CAMARO 3 POINT STRUT TOWER BRACE FOR 305 MOTOR

Part # CF-373

1982-1992 Camaro and Firebird adjustable three point strut tower brace. Update the handling of your 3rd Gen Camaro or Firebird with simple bolt on parts from Heidts®. Fits small block throttle body injected motors

Strut tower braces are also available in two point configuration and for all stock engine options.

1982-1992 CAMARO STRUT TOWER UPGRADE KIT

Part # CF-387

1982-1992 Camaro and Firebird strut tower brace upgrade kit. Kit upgrades a Heidts® 2 point strut tower brace to a 3 point kit. Fits V6 Throttle Body and V8 Tune Port engines.

The strut tower upgrade kits will only work with Heidts® strut tower braces and will not work without having the 2 point strut tower brace already installed.

1982-1992 CAMARO/FIREBIRD INNER SUBFRAME CONNECTORS

Part # AL-102411

Help stiffen up the ride of your 3rd gen Camaro or Firebird with new inner subframe connectors for the 1982-1992 Camaro and Firebirds. Alston's bolt-on subframe connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines.

Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1982-1992 CAMARO/FIREBIRD OUTER SUBFRAME CONNECTORS

Part # RC-536

Help stiffen up the ride of your 3rd gen Camaro or Firebird with new Heidts® outer subframe connectors for the 1982-1992 Camaro and Firebirds. Heidts bolt-on subframe connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty. (they can also be welded). Note, these will not fit convertible cars.

1982-1992 F-BODY TORQUE ARM KIT

Part # RC-587

1982-1992 Camaro and Firebird torque arm kit with trans mount. Our new 3rd gen torque arm kit will help put your power to the rear wheels, increasing both your handling and acceleration at the track or on the street. GM's factory torque arm was flimsy and did the job back in the day. With modern engine swaps, they can't handle the power and twist under hard acceleration.This is a complete kit to get you going and includes item numbers RC-588 Trans Mount, RC-602 Torque Arm, and RC-609 Axle Bracket. 

1993-2002 CAMARO & FIREBIRD 2 POINT STRUT TOWER BRACE

Part # AL-401059

Heidts® two point strut tower brace for the 93-2002 Camaro and Firebird. An easy upgrade that you will notice immediate results from, the two point strut tower brace reduces flex for better handling through corners.

1993-2002 CAMARO/FIREBIRD SUB FRAME CONNECTORS

Part # AL-102410

4th Gen Camaro and Firebird sub frame connectors.

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your 4th Gen F-Body stock floor, requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)

1994-2004 MUSTANG SUB FRAME CONNECTORS

Part # AL-102414

1994-2004 Mustang sub frame connectors

ALSTON’S bolt-on sub frame connectors are carefully formed to fit the contour of your stock floor requiring no cutting or welding to install allowing you to retain your stock exhaust, fuel and brake lines. Easy installation, in about four hours, you can preserve the consistency and performance of your Uni-Body chassis. These connectors come complete with grade 8 hardware and instructions. They are powder coated black to insure long life and beauty (they can also be welded)


4-LINK PRO-G® CONN. 68-74

Part # RN-056

68-72 Nova Subframe Connectors for PRO-G® front suspension 

CAMARO/FIREBIRD SUBFRAME CONNECTORS FOR STOCK FRAME

Part # RC-102

1967-1969 Camaro/Firebird Bolt In Subframe Connectors - Coupe (Factory Subframe)

CAMARO/FIREBIRD SUBFRAME CONNECTORS, CONVERTIBLE

Part # RC-103

1967-1969 Camaro/Firebird Subframe Connectors - Convertible Models With Factory Subframe